Marine casting
Marine casting with lightweight concrete or foam concrete.
Erosion-proofing quays and piers with lightweight concrete
In order to minimize subsidence and landslides or repair erosion damage to, for example, a pier or quay, we at Tecomatic can perform marine castings. By using lightweight concrete or foam concrete, we keep down and reduce the weight of the structure to be repaired.
We grout a concrete that has a density of as little as 600 kg/cubic meter. The lightweight concrete is produced in a mixer where a dosing pump mixes in air and creates pores/foam to adjust the volume and weight.
The benefits of marine castings
- Minimizes the risk of subsidence and landslides
- Keeps down and reduces dead weight
- Can replace the need for rebuilding
- Can be performed even in sub-zero temperatures
Customer solutions
Skanska - New Slussen
The redevelopment of the Slussen area in Stockholm has been ongoing for some time. Tecomatic is working on erosion protection in several parts of the area and in Mälardalen. One of the reasons for rebuilding Slussen is that the water level, and therefore the risk of flooding, is too high.
Merab
Merab (Mellanskånes Renhållnings AB) operates a waste facility and recycling center at Rönneholms mosse. The site also has three landfills, two closed and one active.
Baltic Offshore
Baltic Offshore was commissioned by Ellevio to install 420 kV (kilovolt) HVAC (heating, ventilation, air conditioning) cable and in connection with this protect Beckomberga-Bredäng.
Recycling industry
A customer in the recycling industry who, among other things, is engaged in the recycling of metals in southern Sweden needs sediment discharge in one of its treatment ponds.
Nacka municipality
Järlasjön is Nacka's largest lake and very important for outdoor recreation in the municipality, but despite reduced emissions from industries and households in the surrounding area, the water quality of the lake is threatened by poorly treated stormwater.
Contact us today
Our technical sales representatives and product specialists will help you find the best solution for your project.